Grain Loadout App Setup

This is a guide to setup the camera viewing app on an Android device, click here for instructions to install it on an Apple device.

To install the camera app, first make sure that your device is connected to an Internet source such as mobile data or Wi-Fi. The access point for your camera(s) is most likely not connected to the Internet. 


app_search.png

Once your Android device is connected to the internet, go to the Play Store and search for "iprosecu."  Choose version 3. 


App_install.png

Tap install.


app_installed.png

The "Open" and "Uninstall" buttons should appear once the app is installed.


notification_bar.png

Swipe down from the top of the screen to bring up the notifications menu. Tap the gear icon to open your device settings.


settings.png

Select the Wi-Fi icon.


main_wifi_screen_disconnected.png

Tap on Nupixx Wireless.


connect_to_wifi.png

Press connect.


wifi_connected.png

You should see the following screen once your device has successfully connected to the access point. 


app_icon.png

Press the home button on your device and locate the iProSecuV3 app icon. If an icon has not been automatically created you may need to locate it under the Apps menu (shown here on the lower right hand corner), or via the Play Store. Open the app.


main_app_screen.png

Tap the "IP CAM" icon.


lan_search_select.png

Go to the LAN Search.


lan_search.png

A list of available cameras should appear. Tap on one to add it to the app.


ip_settings.png

Give the camera a name for your reference in the "Title" box. The IP settings should be left as is. The username and password should both be "admin." Set the resolution to High and push save. 


error_message.png

If an error message appears ignore it and push ok.


lan_search_after_setup.png

Repeat the previous two steps if you wish to add more cameras to the app (this can be done later). Otherwise, push the back button.


camera_selection.png

The camera(s) you added to the app should appear in a list here. Select the one you wish to view.


connected_camera.png

This is the camera viewing screen. Push back if you wish to view a different camera.


camera_horizontal.png

Rotate your device horizontally to obtain a larger view. You can also pinch and zoom with the screen rotated.